I've joined to local project Masks4Docs and got STL-file.
My latest settings (version 6) and project is below for Prusa i3 MK3S.
Highlights:
- This is not a stack version. It has beep at the as finished notification.
- No need to wipe the bed - never did for 50 items.
- Slow first layer - very important.
- No fills on first layer, only 2 walls and filler.
- Infill 5% with fastest pattern.
- 2 bottom and 2 top solid layers for durability.
- This is PLA version and make sure to set extruder temp to 220-230 to overcome filament skipping. You may detect 2-3 skips at start of second layer (speed increased, temp dropped to 205-210) but it will be on inner perimeter, so no worries, then temp will rise to 220 and no skips will be from then.
- First layer extruder temp is high due to second layer speed increase and temp drop.
IMPORTANT!
This prints were testes on quality plastic from Prusa. Recently I got free roll from 3dfactory.co.il - it has extra smell and you may need to add extra perimeter to have same model strength.
Print Settings
 |
| 1 print settings - 1 layers and perimeters |
 |
| 1 print settings - 2 infill |
 |
| 1 print settings - 3 skirt and brim |
 |
| 1 print settings - 4 support material |
 |
| 1 print settings - 5 speed |
 |
| 1 print settings - 7 advanced |
Filament Settings
 |
| 2 filament settings - 1 filament |
 |
| 2 filament settings - 2 cooling |
 |
| 2 filament settings - 3 advanced |
Other useful links
https://www.prusa3d.com/covid19/
https://3dverkstan.se/protective-visor/protective-visor-versions/
UPDATE 2020-04-11 - v7
- Better fan speed and only from 3rd layer, fixes thermal runaway (filament skipping).
- Dont move dead far away at the end end code, be ready to start again.
- Faster start, faster calibration and shorter wipe tower
- Download 3MF - https://www.dropbox.com/s/57ha160by0w07kk/v7-masks4docs-face-shield-alexey.bass.3mf?dl=1
