This is my device

Make: AudioCodes
Model: MP-202 (012 uses MP-202/012/CBL)
I got with M.Date 12/2008
user@wazup:~$ sudo nmap -sS -O 10.100.101.1
Starting Nmap 5.00 ( http://nmap.org ) at 2010-05-06 01:24 IDT
Interesting ports on 10.100.101.1:
Not shown: 995 closed ports
PORT STATE SERVICE
23/tcp filtered telnet
443/tcp open https
992/tcp open telnets
8080/tcp open http-proxy
8443/tcp open https-alt
MAC Address: 00:90:8F:09:93:DC (Audio Codes)
Device type: general purpose
Running: Linux 2.4.X
OS details: Linux 2.4.18 - 2.4.35 (likely embedded)
Also another suspicious ports
2555 open uknown
8023 open unknown
2945/sctp filtered h248-binary
7626/sctp filtered simco
UDP scan took 20 minutes.
user@wazup:~$ sudo nmap -sU 10.100.101.1
Starting Nmap 5.00 ( http://nmap.org ) at 2010-05-06 01:26 IDT
Interesting ports on 10.100.101.1:
Not shown: 983 closed ports
PORT STATE SERVICE
53/udp open|filtered domain
67/udp open|filtered dhcps
68/udp open|filtered dhcpc
161/udp open|filtered snmp
789/udp open|filtered unknown
965/udp open|filtered unknown
1007/udp open|filtered unknown
1105/udp open|filtered unknown
1900/udp open|filtered upnp
16503/udp open|filtered unknown
20678/udp open|filtered unknown
21524/udp open|filtered unknown
21644/udp open|filtered unknown
21780/udp open|filtered unknown
21898/udp open|filtered unknown
49173/udp open|filtered unknown
55043/udp open|filtered unknown
MAC Address: 00:90:8F:09:93:DC (Audio Codes)
So, to place this box after your router and control it, you need to connect your PC via cable in LAN/PC port, wait for IP address from it, check a Gateway IP and use it in browser with 8080 port (https://GATEWAY-IP/ also works). Username is "user", password is "wel-012!" (all without quotes). Set Connection Type to "Automatic IP Address Ethernet Connection".
No you need to set QoS rules for SIP and RTP protocols - this will help prioritize voice traffic over other, so when you need to call, your torrent will not affect you, because voice will get high priority.
Ports are 5060, 5061, 5004, 5005.
If support guys can't reach it, setup port forwarding to black box, they should be happy.
Led indication
SIP registration status LED indication - a successful registration ('online' state) is indicated by a LED flashing slowly (a very short flash every 4 seconds). This indication is per phone line.
The LEDs labeled 'Phone 1' and 'Phone 2'reflect the status of the phones connected to the MP-202:
ON - During power-up and when the phone is off-hook.
OFF - Normal / the phone is on-hook
Flashing - Phone is ringing
See also about that in Hebrew




