Tuesday, May 25, 2021

PSA Peugeot 3008 Bosch EDC17C60 Start-Stop Inhibition

If you like me don't see a lot of fuel savings in Start-Stop system on Peugeot 3008, here is how you can deactivate it forever using Diagbox v9.91.

This will work for Bosch ECU EDC17C60. Step-by-step instructions below.


Engine OFF, ignition ON

ECU (choose EDC17C60 if not auto-detected)


REPAIR


PACK REPAIR


SERVICE ACTION


WORK ON THE STOP AND START SYSTEM


ACTIVATION OF THE STOP AND START



INHIBITING OF STOPPING - YEEEEES!!!


Disabled light should come up on dashboard.

You are welcome! :-)
Not every official service know about that procedure.
Posted by Alexey Bass at 23:35
Labels: , , , , ,

7 comments:

  1. Unknown26/5/21 11:00

    Thank you very much !!!!


    ReplyDelete
  2. arik6/11/21 19:33

    Hi Alexey,what model is the 3008? The new 2016 and on?
    How do i see the ecu model and get the control app?

    ReplyDelete
    Replies
    1. Alexey Bass14/11/21 13:25

      Mine was 2018. You need to open bonnet and check label on ECU.

      Delete
    2. arik5/1/22 12:59

      Thanks Alexey
      mine is 2019, so the same
      just got the PP2000 module and diagbox 9.9.1
      will try soon:-)

      Delete
    3. Alexey Bass5/1/22 13:16

      Great 😃
      If will update here later how it went, that would be nice.

      Delete
    4. arik6/1/22 08:59

      My car is,diesel so different ECU MD1cs003
      but on the last menu i dont have ''activation of the stop start'' but ''reconnecting of the ancillaries'' battery, below the ''forcing of stop and start''.
      And both are failing to go further...😒

      Delete
    5. Alexey Bass6/1/22 10:45

      Mine was diesel as well. Maybe the procedure is a bit different for your ECU.
      It took me few days and sessions to find my flow, I was checking different blocks and every menus :-)

      Delete

Subscribe to: Post Comments (Atom)